Main Дополнительно

Products Links

A complete range of water heating products, gas and electric water heaters, calorifiers, buffer tanks, PHEs

ü  Each water heater is manufactured with the utmost safety in mind. Multifunctional gas valves with high limit cut-out and an exhaust fume control device (DCF) on all gas storage models prevent accidental gas and combustion fume leakage.

ü  Working and hi-limit thermostats on all electric storage models offer an accurate temperature setting and double safety against overheating.

ü  Advanced electronics on our instantaneous gas water heaters provide, besides an extremely correct temperature setting, high safety against overheating and malfunctioning. All water heaters carry the CE mark for proven safety.

The new E PE and E PEX range of floor standing electric water heaters is a storage type system. Ideally suited to areas where natural gas or LPG is unavailable. The units are fitted with one or two heating elements with different power, a working thermostat with outer control, and an hi-limit thermostat. The range can suit different requests in order to reduce the heating time of the DHW. The tank is glass-lined at 890°C while the insulation is provided with rigid polyurethane and a removable PVC jacket. The magnesium anodes are easily accessible and offer a supplementary cathodic protection against corrosion. The range is suitable to be fitted with one of the TPS dedicated kit, made-up of a brazed PHE in stainless steel plates AISI 316, a recirculation pump, a thermostat and piping. The fitting of all the components to an external energy source (i.e boiler, solar panel, heat pump), will make the heating of the water faster and cheaper.

HIGH RECOVERY GAS WATER HEATERS

The GP model offer high output burners which will cater for all commercial and industrial demands. It is recommended when very large quantities of hot water are needed. The GP series can be installed singularly or in multiples should the application require larger peak demands. It is provided with an electro-valve, double thermostats with graduated scale and stainless steel all gas burners with pilot flame, whilst functioning is controlled by a thermocouple. It can be connected to a BMS panel or time control without the need of a separate solenoid valve. With the built-in control thermostat and hi-limit stat the GP is a fully independent and packaged water heater. Safety is the essence of a HEIZER product, an example of this is the DCF flue spillage sensor, which interrupts the gas flow to the burner in case of exhaust or combustion leakage. The DCF will cut the gas supply to the water heater thus eliminating the danger to occupants of the building. The magnesium anodes are easily accessible and are an effective cathodic protection against corrosion. The up-rated of the GP series ensure a high continuous output whilst maintaining high efficiencies.

PLATE HEAT EXCHANGERS

The gasketed plate heat exchangers series PHE TH, PHE FL, and PHE FL+, together with the brazed plate heat exchangers PHE WB are ideally designed for someone who demands efficiency and trustworthiness. The HEIZER heat exchangers can be applied in the residential and industrial sectors (HVAC, food, dairy, chemical, renewable energy, cooling, Oil & Gas). using hot or cold water and  steam as primary fluid. The service support is staffed with fully experienced personnel that are committed to assisting the customers in every step of the way, and to provide commissioning of all products to ensure safe installation and usage. The wide range of PHE’s offer the best options for different applications, such as:

• DHW production

• heat exchanging in heating systems

• district heating

• pool water heating

• solar applications

• heating/cooling of alimentary fluids (milk, beer, wine…)

• machineries cooling

• heat recovery from industrial processes

• oleo-dynamic sector